Low profile Iqos Heets/Terea ashtray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small box for holding iqos sticks, either for used or new ones
- Ocena
- 4,5 / 5
- Polubienia
- 9
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 1421
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Outdated model
Better try this: Iqos Heets/Terea Mobile Ashtray by Joesn | Download free STL model | Printables.com
I wanted to make a low-profile disposal box for iqos sticks.
As it has very thin walls, make sure to use a strong filament with good layer adhesion. Also ironing is recommended to ensure the sticks will slide inside the box.
Planned improvements:
- Reinforce lid so it is less prone to breaking
- Make a beefier version
- Finish the sliding lid (add a proper end-stop that looks better than the current cylinder)
The V2 prototype has a cylindrical end stop which is intended to be glued after the sliding cover is inserted
The files attached are CURA project files tuned for PLA with direct-drive extruder. Make sure to change retraction if you're using a bowden stlye extruder
I'm also working on a new top cover with a sliding lid. The prototype is already available, but I consider it unfinished