1 / 2
plumb bob with scale
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical frame for a plumb bob with a scale of ±4.5°.
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 1287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (84)Powiązane
Vertical frame for a plumb bob with a scale of ±4.5°.
You just need to add a string and a some weight. I used a 0.8mm nylon string and a few washers.
Print @ 100% size for most accurate readings. Part ist 240mm long and fits on the printbed of a MK3(S+).
edit: Added a second version, extended to the side, for use on the edge of a horizontal surface. Didn't print this one yet.