1 / 8
Handlebar extender for Silence S01 / Seat MÓ electric scooter, high windshield — zdjęcie 1
1 / 8

Handlebar extender for Silence S01 / Seat MÓ electric scooter, high windshield

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Additional handlebar tube for mounting cell phone, navi, speedometer, RAM mount etc.

Ocena
0 / 5
Polubienia
6
Pobrania
36
Wydruki
1
Wyświetlenia
746
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The cell phone / Navi is optimally in the field of vision, protected from rain and excessive sunlight. Portrait and landscape format possible. The rod is really stable with the two clamps, does not move a bit. No vibrations. I think this is the ideal mount for the phone.

The holders are 3D printed, the tube is from a handlebar extender for bikes or motorcycles (eg ebay or Amazon), 200 mm long with 22.0 mm diameter, coated black (only the tube is used).
Screws needed: 8 countersunk screws M4 x 16 mm, 8 nuts M4, 2 cylinder head screws M4 x 20 mm, 2 stop nuts M4.

Printed with ASA filament at 0.2 mm layer height and 80% density. For the right side, mirror the STL file in the slicer.

Translated with www.DeepL.com/Translator (free version)

 

12/12/22:

There is a second version ("higher"). This should be used if hand protectors are installed.

 

Tagi