1 / 3
Dig Octa PSU Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PSU (Meanwell LRS-350) mount for the Dig Octa LED system
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1098
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
The QuinLED Dig Octa has just been released, and I wanted to mount one to a Meanwell PSU for my christmas light show. I made this mount so the dig octa can be secure on the psu, but still allow good airflow.
I tend to print designs like these with extra walls (4 or 5) and PETG for strength, since there's not a lot of plastic holding the board to the PSU. I haven't had any trouble with it so far.