Cristmas LED Defusur REPAIR Translucent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cristmas LED Defusur REPAIR Translucent A Repair of a Xmas LightSTAR Tree Top Mount SAFES alot of Money
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 203
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
As the Xmas nears all the Time things go missing or Broken
so i decided to start to repair
EVEN translucent Glass like things as here the LED-Defusor of a Christmas Star Top
so it looks great as from 1m as you normally look at your tree EVEN in near IMAGE
THE settings:
STANDARD low Cost PLA tranperent Clear around 10USD the 1Kg Spool
temp Noozle 172°C the Hotbed is at 65°C
the Layerhight is at 0,3mm while Wall width is at 0,6
the Printspeed is at 15mm/sec you coudt go lower as it only prints in 5min
its a VASE Mode with no Bottom and Top
NO Fan
SEE the m3f file provided
I personally shield of the Prithead on my A8 with simple Leafleds or hardpaper
that gets some Head shield and keeps the heat inside for the print
NOT very professionell but it works no need to falt or fix the paper at all just lean it to the Printhead and its good!!!! LOL ROFL
it will not move at this 20mm Round part Surprice it dident fall of on all the prints i made