1 / 3
CR-10 Smart Pro and CR-10 Smart tool tray drawer insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool tray inserts for the CR-10 Smart Pro and CR-10 Smart.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 297
- Wydruki
- 3
- Wyświetlenia
- 1738
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (65)Powiązane
Tool tray inserts for the CR-10 Smart Pro and CR-10 Smart. Modified to accommodate the larger screw head for the drawer handle and to clean up some of the geometry.
Printed on a Creality CR-10 Smart Pro
Resolution/Layer height: 0.15
Infill: 20%
Wall lines: 3
Wall line width: .8
Top layers: 4
Bottom layers: 4
Filament: Amolen Black/Silver two tone PLA
Also prints fine with 0.20 resolution and 10% infill.