Bambu Lab X1 Magnetic Poop Chute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This poop chute fits on the back of the Bambu Lab X1 and held with a single magnet.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 1581
- Wydruki
- 15
- Wyświetlenia
- 8378
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
See the update below…
This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a medium sized container. A larger version will be coming soon.
The poop chute uses a single magnet (0.5 inch diameter, 0.10 thick).
The recess for the magnet is modeled at 0.5 inches diameter so depending on your print, it could be an interference fit or apply some glue.
Filament - PLA+
Support - None
Layer - 0.2mm
Infill - 20%
3mf file using Bambu Lab Studio (slicer)new design is
UPDATE:
The design has been modified to accommodate the feet added to the X1, X1C, P1P, and P1S.
The new design is poop_shoot_magnetic_V2