Pikachu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pikachu
- Ocena
- 4,769 / 5
- Polubienia
- 351
- Pobrania
- 3616
- Wydruki
- 15
- Wyświetlenia
- 8897
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Pikachu
Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D
I've also made the positioning of the tab so that you can easily remove it during your slicing process, if you'd like to place the artwork on a wall.
2023-04-14: Added “Pikachu - Colour change at height - v2.3mf”, for those of you who'd like to print a multi-colour Pikachu.
Start printing with Yellow (0 to 0.8mm, then switch to Black from 1.0mm onwards. i.e. assuming you're printing at a 0.2mm layer height; print layers 1 through 4 as yellow, then change to black for layers 5 through 8.
Please be sure to check your slicer's preview, before you print.