1 / 2
US Quarter Dispenser w/ Belt Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A US quarter dispenser that clips onto your belt. Handy for arcades!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 1139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (21)Powiązane
Description:
I regularly visit arcades and needed a quarter dispenser that can be clipped onto my belt. Skiid's coin dispenser looked like a good basis, so this remix was born.
Ignore the files in the “source” folder unless you want to make modifications.
Features/Improvements:
- There is a belt clip on the side, so you don't have to carry it in your hands or dig it out of your pocket.
- The coin slot is taller to better suit US quarters. The original design required a lot of sanding.
- Larger, more common, springs with a 3/4 inch or 19 mm diameter (possibly a little bigger) are supported.
- The included spring spacer is tall enough to avoid jamming. Now there is no need to glue two shorter ones together!
- The thumb opening at the top has been extended to the width of the dispenser. This allows you to more easily remove quarters.