1 / 1
Keurig K-Elite Riser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1.5in or 40mm riser for the K-Elite Keurig machine.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
1.5in or 40mm riser for the K-Elite Keurig machine. Attaches to the original base and tray to keep a factory finish.
Reduces coffee splatter for less mess.
Prints as oriented with no supports needed.
PLA material at 0.2mm layers with 20% infill is more than strong enough.