EBB 36 Mount for LGX Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a Big Tree Tech EBB 36 toolboard directly behind an LGX Lite extruder.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 229
- Wydruki
- 0
- Wyświetlenia
- 2228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mounts a EBB36 toolboard to the back of a LGX Lite extruder. Use 18mm standoffs to position the mount directly behind the LGX Lite motor. When paired with 18mm standoffs, the mount will not touch the LGX Lite motor.
Note: this mount does not include an umbilical cable anchor. Many designs do incorporate an anchor into the EBB 36 mount, but I suspect this may amplify resonances and affect the input shaping numbers. I suggest using my EVA 3 40x28 fan inlet umbilical anchor found here.
For best results, print this as rigidly as possible; 6-10 perimeters suggested. Secure the toolboard to the mount with M3 bolts and M3 x 4mm x 4.6mm heat set inserts. Set the inserts on the backside of the mount as pictured.
Happy Printing!