1 / 1
Badge and RSA Token Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is intended to tight hold an RSA security token and a single identity badge together.
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 536
- Wydruki
- 3
- Wyświetlenia
- 2396
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (35)Powiązane
I printed this with tallest dimension vertically at 0.2 - 0.25 mm layer height with no support. I used 3-5 layers to increase strength with ~15-20% infill and have yet to have one break on me.