Snowflake Vasemode Ornaments -- Super fast prints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find good snowflake ornaments that would print fast and clean, so I decided to make my own Vase mode prints.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 564
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find good snowflake ornaments that would print fast and clean, so I decided to make my own. These are printed in vase mode and each one takes around 5-8 mins on my Ender 3 Pro.
These snowflakes are designed to be printed using a .6 nozzle with a line width of .6mm. If you are using a .4 nozzle, set line width to .6 and set a slower speed for best results. They come out stronger if the extruded lines are close enough to touch each other. If using a smaller line width than .6, scale down so the lines slightly overlap.
Enjoy the prints and a Merry Christmas to Everyone!!