cute (print in place) Christmas tree with shoes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a PIP (print in place) re-make/model from my previous Christmas tree with shoes. Enjoy printing XD!
- Ocena
- 5 / 5
- Polubienia
- 166
- Pobrania
- 702
- Wydruki
- 18
- Wyświetlenia
- 2661
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
I thought of making a print in place variant of my previous cute Christmas tree with shoes: https://www.printables.com/model/331994-cute-christmas-tree-with-shoes
you can scale the model if you want to print it bigger. happy printing!
3D PRINTING
I printed it with a layer height of 0.3mm (printed it in 1h with 55mm/s speed on an ender 3 s1 pro) but I recommend printing it with a layer height of 0.2mm. After printing you have to release the feet/shoes by wiggling a tweezer between the shoe and the tree. I used 20% infill.