NASA neon with EL wire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a small NASA worm logo neon sign that works with EL wire
- Ocena
- 5 / 5
- Polubienia
- 484
- Pobrania
- 639
- Wydruki
- 11
- Wyświetlenia
- 5285
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
This is a pretty quick and easy project to be honest. The print should fit most standard print beds. And then you order 1 meter of EL wire in the color you want it to be on AliExpress for a few bucks:
https://s.click.aliexpress.com/e/_mM9Y8VV
You can go for a USB connection or a battery box. The EL wire snaps in the grooves in the print with some pressure. The sharper corners are a little harder but I'm sure you'll manage.
Be warned, I'm not the most skilled technical designer, so it doesn't fit the 1 meter of EL wire exactly, there is about 2 cm of wire sticking out the end that I'm using as a kickstand. But apparently you can just cut this off if you want to go for the clean look.