1 / 5
Bicycle Headlight Removable Flashlight Mount (24/25mm handlebar, 24/25mm flashlight)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed flashlight mount to use as a bicycle headlight.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
3D-printed flashlight mount to use as a bicycle headlight. Suitable for a handlebar with a diameter of 24 to 25 mm, and a flashlight with a diameter of 24 to 25 mm. The flashlight tightener uses an M5 hex nut and bolt (20 mm). The handlebar tightener uses an M4 internal hex/inbus nut and bolt (20 mm). Printed on an Ender 3 V2 with a direct drive mod.