1 / 1
Lots of Snowflakes inside a bauble (Christmas tree ornament) — zdjęcie 1

Lots of Snowflakes inside a bauble (Christmas tree ornament)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print it. Hang it on the Xmas tree. Enjoy! Ho ho ho!

Ocena
4,917 / 5
Polubienia
98
Pobrania
659
Wydruki
15
Wyświetlenia
1322
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

https://www.buymeacoffee.com/maxt

----------------------

2mm thick

The best quality is achieved if printed face down

Print: 0.2mm
Nozzle: 0.4mm
Support: Not needed
Brim: Not needed
Infill: Not needed, but I'd suggest going with 100% to ensure sturdiness

A tip: If you want to get this print easily off your heat bed, place the heat bed with the printed model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily without any breaks/cracks, as shown on the photo below :)


 

Happy Printing!

--------------

https://www.buymeacoffee.com/maxt