Bird Temple Feeder NOSUPPORT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a modified feeder to let it print without support easier. (+ added a little grove for the Z Seam in Cura)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a modified feeder to let it print without support easier.
(Removed some material underneath the round cutouts)
While slicing with Cura 5.2.1 the Layers sometimes started almost mid air so I added a little grove for the Z Seam in Cura. Set Z Seam Position to the front edge of the Part and almost all layers start there, resulting in better overhangs. I know that PrusaSlicer has a Seam painting tool and I would like to have this feature in Cura as well. :-)
This part is a remix from the Bird Temple by JobSmolders:
Bird Temple by JobSmolders