ABS printable Escapement Spring for 3D printed mechanical Clock with Anchor Escapement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an update of downeym's Escapement Spring modification that is designed for printing with more flexible ABS.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 2336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is an update of downeym's Escapement Spring modification that is designed for printing with more flexible ABS. I found that the existing one was too floppy when not printed with PLA, so I thickened the spring section 2mm.
Print instructions
Category: Other Summary
This is an update of downeym's Escapement Spring modification that is designed for printing with more flexible ABS. I found that the existing one was too floppy when not printed with PLA, so I thickened the spring section 2mm.
Instructions
Print with ABS. Should not require support.