Reinforced and Altered Taz extruder mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is basically a reinforced extruder mount with a duct.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is basically a reinforced extruder mount with a duct. it is modled off the Taz 6 prototype extruder body, and borrows duct ideas from several sources. it does weigh more than stock, but I believe this unit may help eliminate some issues in prints due to nozzle harmonics in corners.
This will only fit a Hexagon Hotend, it is not designed for use with the Buddaschnozzle.
Having now attached this to my machine, I can indeed confirm this does reduce some nozzle harmonics.
New revision: 3.1b removes the small overhang that was in the way of the back mount track that you may have encountered when trying to fit this to the Taz Extruder Carriage V notch. Anyone who prionted the older one, you can safely fix that issue by trimming that piece off of the Reinforced and Altered Taz extruder mount
Print instructions
Category: 3D Printer Parts Summary
This is basically a reinforced extruder mount with a duct. it is modled off the Taz 6 prototype extruder body, and borrows duct ideas from several sources. it does weigh more than stock, but I believe this unit may help eliminate some issues in prints due to nozzle harmonics in corners.
This will only fit a Hexagon Hotend, it is not designed for use with the Buddaschnozzle.
Having now attached this to my machine, I can indeed confirm this does reduce some nozzle harmonics.
New revision: 3.1b removes the small overhang that was in the way of the back mount track that you may have encountered when trying to fit this to the Taz Extruder Carriage V notch. Anyone who prionted the older one, you can safely fix that issue by trimming that piece off of the Reinforced and Altered Taz extruder mount
Print Settings
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.5mm nozzle
Infill: 85% or better
Notes:
The small duct return piece requires support. Everything else may be printed without it. You want a high infill for this one as it is structural. PLA is not appropriate here due to the danger of heat warp.
Post-Printing
Instructions
You will need 3 M3 heat set inserts for the main extruder mount, 4 m3 heat set inserts for the hexagon duct, and another 4 if you choose to print the optional stock taz fillament cooling duct, which may be found in http://devel.lulzbot.com/TAZ/accessories/extrusion\_fan/STL\_&\_g-code/ . You will also need several M3 bolts (probably 10mm long) M3 washers (3) and several small zip ties for cable pathing.