VOX FANG shroud for Voxelab Aquila, Aquila X2, Aquila C2.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FANG shroud for Voxelab Aquila, Aquila X2, Aquila C2.
- Ocena
- 4,75 / 5
- Polubienia
- 67
- Pobrania
- 680
- Wydruki
- 3
- Wyświetlenia
- 3200
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
7-12-2023 NEW V7 eliminates hang ups on the hotend (this was mostly seen with all metal such as microswiss & clones) & the lower bolt head cutout was enlarged to accommodate printers where the bolt head was holding the shroud away from the back plate.
6-21-2023 V5 with some fixes including a pinhole in print
5-6-2023 CR-touch V3 added (tested confirmed working by testers... I don't own a CR so if there's a issue let me know and ill do my best to fix it but this was confirmed by 3 separate testers as working with CR)
12-3-2022 V2 added with and without BLtouch mount
VOX FANG is a fang style shroud for the Voxelab Aquila, Aquila X2 & Aquila C2 (They all use the same hotend so it should fit all 3)
Uses stock fansHas BL touch mount Even parts coolingIncreased visibility of nozzle making it easier to see active printing low weight, lighter weight than stock shroud & satsana shroudoptional 40mm grill with custom Vox Fang logo
BLTOUCH probe offset: X -37 Y -8
If using the Voxelab Aquila Cable Chain Full Set (https://www.thingiverse.com/thing:4725903) you will want to use my hotend mount https://www.thingiverse.com/thing:5565128
I have made many revisions and test prints to get to this point, if any major issues are found I will do my best to fix them but at this point in testing of this version no issues have been found.
If you like my work feel free to leave me a tip.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
Yes
Notes:
tree supports touching bed only
enable print thin walls
Category: 3D Printer Parts
