Grid for VW T6 California "Beach" Refrigerator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a grid to put into the California's refrigerator. It works around dirt collecting in the bottom of the box.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 620
- Wydruki
- 4
- Wyświetlenia
- 2424
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
Two of these grids fill the complete floor of the fridge. It is a stable but not massive design.
Printing
Good with standard settings 0.2mm layer height and 0.4mm nozzle. Used for indoor use, PLA is just fine. Can be printed without support - place upside down.