Turret Ring Slew Bearing base and main pulley for Moveo Robot Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is another modification based off of Labala's excellent Moveo upgrade parts.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is another modification based off of Labala's excellent Moveo upgrade parts. This time I've bored out the main pulley for arm rotation and made a matching base for it. This uses an inexpensive 5.5" (140mm) turntable bearing (I used this one specifically https://www.ebay.com/itm/1pc-new-5-5-140mm-Home-Hardware-Aluminum-Round-Lazy-Susan-Bearing-Turntable/122799616711?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2060353.m2749.l2649) as well as 8 M4 trapazoid head bolts and nuts. 35mm - ish should work fine. You may need to go with phillips head ones in this instance to get proper countersink clearance.
Assembly instructions:
- you will need the other half of the base, the motor mount, cover and belt tensioner from Labala's project.
- install the ring on the printed base, with the ring clearance extension down, make sure the bolts are tight. Consider using lockwashers here.
- install the nuts in the pulley ring, and bolt it to the stock arm base using the stock bolts.
- bolt the turntable slew bearing to the bottom of the pulley
Assemble the remaining base components.
Thats it, you now should have a robot arm you can bolt to a baseplate or something.Future expansion plans will include some sort of mount for a 2 stage slip ring assembly (large outer 12 ring, smaller inner 24 ring maybe?
I'm printing the larger piece now, will post pictures when it's done.
Print instructions
Category: Robotics Summary
This is another modification based off of Labala's excellent Moveo upgrade parts. This time I've bored out the main pulley for arm rotation and made a matching base for it. This uses an inexpensive 5.5" (140mm) turntable bearing (I used this one specifically https://www.ebay.com/itm/1pc-new-5-5-140mm-Home-Hardware-Aluminum-Round-Lazy-Susan-Bearing-Turntable/122799616711?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2060353.m2749.l2649) as well as 8 M4 trapazoid head bolts and nuts. 35mm - ish should work fine. You may need to go with phillips head ones in this instance to get proper countersink clearance.
Assembly instructions:
- you will need the other half of the base, the motor mount, cover and belt tensioner from Labala's project.
- install the ring on the printed base, with the ring clearance extension down, make sure the bolts are tight. Consider using lockwashers here.
- install the nuts in the pulley ring, and bolt it to the stock arm base using the stock bolts.
- bolt the turntable slew bearing to the bottom of the pulley
Assemble the remaining base components.
Thats it, you now should have a robot arm you can bolt to a baseplate or something.Future expansion plans will include some sort of mount for a 2 stage slip ring assembly (large outer 12 ring, smaller inner 24 ring maybe?
I'm printing the larger piece now, will post pictures when it's done.
Print Settings
Printer Brand: LulzBot
Printer: TAZ 5
Rafts: No
Supports: Yes
Resolution: 0.5mm nozzle, ABS (PLA might work better here)
Infill: 15% infil, 7 shells.
Notes:
This is going to require support for the mounting tabs and the slew ring recess.