Jack Skellington Snowman Face
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What's this? A face that you can share! Add a face from a holiday classic to your snowman!
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 632
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I designed this to look like someone scribbled a face on a snow-person using a marker. I drew the SVG by hand, imported it to OpenSCAD, and added the fixation posts to the back at a slight angle so they help the pieces stay in place when the snow starts to melt.
Edit: added the bow tie model
When I sliced, I scaled up the whole print by 160% (all axes) and that gave a pretty good size. It should scale up or down depending on your creation size. I printed the bow tie separately, scaled up in size as much as I could fit on the print bed.
I printed in PETG to be more UV/sun resistant over time. I also printed at 0.3mm for a little more strength. Depending on how cold it gets, they can get brittle.
The nostrils posed a challenge because I didn't want individual posts and mounting. So I added a strap and printed everything after a certain height in translucent white to help hide the strap and keep the nostril alignment/spacing.
I also created two versions. One to look like a classic Jack Skellington (Classic), the other to look like someone used a marker to graffiti Jack somewhere (Scribbled). I would love to hear what you think!