1 / 5
Voron 2.4 300mm Chamber Light WS2812B Neopixel 10mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a chamber light mount for the Voron 2.4, 300mm.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 1944
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (31)Powiązane
This is a chamber light mount for the Voron 2.4, 300mm. It uses standard 10mm wide, 3mm thick WS2812B type neopixel lights. Each section is 6-3/8" long (161.9mm), and is attached using two m3x8mm socket head cap screws and two m3 t slot nuts.
I designed these so that two of them would fit on the upper left, and two on the upper right sides, inside the Voron enclosure.
If you buy lights with adhesive backing, you can cut the light strip to length and stick it in the slot. The inner opening is 145.9mm x 10.2mm x 5mm deep.
