Nail Polish Carousel Display

Nail Polish Carousel

Carousel for storing nail polish bottles, each carousel section holds 7 bottles and the top static section holds a further 3. Designed around the dimensions of an OPI brand bottle. 

Rotating segments are keyed - hex key with 7 bottles per section means you can have segments aligned vertically or a gentle spiral.

Note: this version has been optimised for additive manufacturing and adjusted to suit more common bearings and shaft vs. the one pictured. These files have therefore not been printed but should work fine, your mileage may vary.

Files:

• Top_Static.3MF Top of assembly, is pressfit onto shaft, use glue if fit is too loose. Recommend adding another method of retaining above for safety - i.e. E-Clip.

• Top_Carousel.3MF top of rotating section, 625 bearing to be inserted into the top - add 1-2 M5 washers on top before adding top static section.

• Middle_Carousel.3MF mid section, use as many as desired to achieve required storage capacity.

• Bottom_Carousel.3MF lowest level, insert 625 bearing into bottom

• Base_Hidden.3MF or Base_Wide.3MF, recommend wide for very tall builds (>4 carousels). 5mm shaft is pressfit into the base, use glue if fit is loose.

BOM:

5mm diameter shaft - length depending on desired height
2x 625 Bearings
M5 Washers

Not tested: M5 threaded rod may be a viable alternative to 5mm shaft.