1 / 2
MMU2S fs-cover (extruder) and mmu2s-selector-front-plate (selector) parts with M6x1 threads — zdjęcie 1
1 / 2

MMU2S fs-cover (extruder) and mmu2s-selector-front-plate (selector) parts with M6x1 threads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This was made to replace the original PTFE tube connector by one with M6 threads.

Ocena
5 / 5
Polubienia
6
Pobrania
67
Wydruki
1
Wyświetlenia
286
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This was made to replace the original PTFE tube connector by one with M6 threads so that I can then replace the original PTFE tube by a ID3mm/OD4mm one. 

This was designed based on this file.

You can find the pneumatic connectors I bought here and the matching transparent PTFE tubing here (chose 3x4 clear). 

Everything was printed with the default “Generic PLA” profile and the “0.15 QUALITY” profile from Prusa Slic3r.

Tagi