52mm PLX DM-6 Simple Mount with Mic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for the PLX DM-6. Should work with any 52mm gauge.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A simple mount for the PLX DM-6. Should work with any 52mm gauge.
I didn't like the stick on style mounts so I made this one mounts with an M4 screw.
Ball mount for a microphone on the side.
Print instructions
Category: Automotive Summary
A simple mount for the PLX DM-6. Should work with any 52mm gauge.
I didn't like the stick on style mounts so I made this one mounts with an M4 screw.
Ball mount for a microphone on the side.
Print Settings
Printer Brand: Printrbot
Printer: Printrbot Simple Metal
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 50
Notes:
Only needs supports for underneath the ball mount on the side. All holes and other overhangs should print fine without any supports.