1 / 9
Star Trek TNG Mini Computer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of an Adafruit project, and requires electronic components from Adafruit to complete. Assembly instructions at thingiverse.com (in the next week).
Print instructions
Front and Back- printed at 0.2mm Layer Height with a 0.4mm nozzle, no supports
Side Number - printed at 0.10mm Layer Height with a 0.25mm nozzle, no supports
Keys - printed at 0.2mm Layer Height with a 0.4mm nozzle. You will need to print 7 and you will need to print with Proto-Pasta Conductive Filament
Case - printed at 0.2mm Layer Height. Supports are needed, but are not needed everywhere (only on the sides and the middle where the keypad sits