Hadley Rocker Frame Mount Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of fortinmike's Dobsonian Mount Storage to fit the Hadley Telescope Rocker Frame with 12mm rods.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 153
- Wydruki
- 5
- Wyświetlenia
- 856
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of fortinmike's Dobsonian Mount Storage to fit the Hadley Telescope Rocker Frame with 12mm rods. I wanted to stiffen the frame and have storage on the frame.
I used m4 x 12mm screws and m4 nuts to fasten it to the rods.
2 of each for the eyepiece holder
4 of each for the basket.
The imperial models have been tested by the community. If you have any issues or questions, please let me know in the comments.
Change log
- Dec. 12, 2022, increased the imperial eyepiece rod holes from 12.5mm to 13.5mm (0.49" → 0.53"). I also re-uploaded the basket but it was already the new size (13.5mm; 0.53").
- Dec 13, 2022, increased imperial dimensions for nuts to allow for better fitment. Holes went from 3.5 mm x 9.9 mm to 3.8 mm x 10.5mm and a depth of 14 mm to 14.2mm. Added a chamfer to the bottom nut holes on the basket to allow for more “squish” on the build plate.
- Jan. 7, 2022, Added the FreeCAD metric files.
If you want to support my work, please consider buying me a coffee!