1 / 8
Organic Support Test for Ender 3 (Pro)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the test gcode for the benchy, modified for bowden setup printers, like the Ender 3 (Pro).
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 2294
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
This is the .gcode to test the organic support in the upcoming update for the PrusaSlicer 2.6.
I modified the original gcode to be able to try it on bowden extruder printers. I printed mine on an Ender 3 Pro.
Print setting that I used:
- there is a file for 200 and 210°C hotend as well
- 60°C bed temperature
- retraction distance: 6 mm
- retraction speed: 25 mm/s
- deretraction distance: -6 mm
- deretraction speed: 25 mm/s
- Z hop: disabled to reduce stringing
The other settings are the same as in the original gcode.
Check the gcode with gcode viewer before printing!
Have fun printing it, and don't forget to share your results!
If you find this gcode useful, please give it a like!