Bayern Munich Wall Clock - No MMU required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy 3 color print, no MMU required.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
For soccer fans. Multi-color print, no MMU required.
Clock diameter is 20 cm. The hole for the clock shaft is 8 mm. I used this Youngtown 12888 movement: https://amazon.com/dp/B01D1K1LPS.
The 3mf files for 0.4mm and 0.6mm nozzle sizes are configured so that the printer will prompt you for filament swaps. If you reslice the 3mf file, please note that Prusaslicer will add a superfluous color swap at the very beginning. You can humor it and simply unload and reload, or use a text editor to remove the first occurrence of M600.
I also uploaded two GCODE files, which have the initial prompt for a filament swap removed AND will remind you (via a M0 command) which color to load at each swap (yeah!). Simply press the knob to initiate the filament unload/reload procedure. I had to upload them as zipped files because Printables didn't like the M0 commands in the gcode, so download the zip files and decompress them.
The order of colors is:
Red→Blue→White→Red→Blue→Red→White→Blue
so 7 swaps in the first 3 layers.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.