Slightly bigger 3DBenchy remarks flag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a label with information to your 3DBenchy.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A flag for a label with information of your Benchy. Useful for having the filament and/or print settings information directly attached to your model.
These are designed to fit the 25 mm minimal length of Brother P-touch labelwriter 18 mm tapes. This allows to print five lines of text. I use empty lines to switch to the smallest font.
Also use chain printing for the smallest label possible without any margin.
The small rims on the left and bottom allow to expose only the top half of the sticky back, slide the label to the left and bottom until it hits the rims, stick the top down and expose the other half of the sticky back.
Updates:
2024-10-20: v2, v2.1
- Slightly increased the size to fit labels that are slightly longer. If the label maker turns off while there is still a chain printed label in queue, it pushes the label just enough to not fit anymore once turned back on.
- Shortened the bottom rim to make it easier to catch the corner of the label and remove the second half of the protective film
- Added a tiny chamfer to the “cargo-box”
- The v2 export file was broken, v2.1 fixed this.