UniFi USG Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This one is made to hold the UniFI USG on top of the UniFi Switch 8 150w It is made to attach to the left front screw…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This one is made to hold the UniFI USG on top of the UniFi Switch 8 150w
It is made to attach to the left front screw on the Unifi Switch 8. The USG is not screwed down.
Updated the Front right leg to include a lip on the front to stop the holder turning.
And the holes to attach the holder to the legs is now made to use beveled screws and nuts. the pegs can still be used but will now need to be glued in place.
I have also added some taller versions of the legs.
Print instructions
Category: Other Summary
This one is made to hold the UniFI USG on top of the UniFi Switch 8 150w
It is made to attach to the left front screw on the Unifi Switch 8. The USG is not screwed down.
Updated the Front right leg to include a lip on the front to stop the holder turning.
And the holes to attach the holder to the legs is now made to use beveled screws and nuts. the pegs can still be used but will now need to be glued in place.
I have also added some taller versions of the legs.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: Doesn't Matter
Notes:
Print the 4 legs and 1 holder and 8 "pegs"
You may have to sand the pegs and or the holes to make it fit. or glue them if loos.
The holder print as it sits. The legs will have to be printed upside down.