Wrist or leg mounted Morse code paddles. V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: I have redesigned these. See description for link to new version.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Note: I've left this model online in case anyone needs spare parts. I have redesigned these. Version 2 can be found here: https://www.printables.com/model/1525157-version-2-of-my-pico-paddles-for-morse-code-includ
Micro paddles for SOTA, POTA, and field work. Takes little space in your go bag, optionally straps on the wrist or leg for convenience. (Choose which base part you decide to print.
Or make two, one with each.)
Minimal hardware design, you only need four screws, three nuts and washers to assemble it. (And a 3.5mm stereo jack)
Print all parts at 0.2mm layer height except the paddle arms, they're best at 0.1mm layer height. Although you can print them at 0.2mm, the finger button will just be a bit rougher.
There are two pages of assembly instructions, but it's best to watch the assembly video linked here:https://youtu.be/q3B8bvtqsUc
Full project video is linked here: https://youtu.be/iaSrEkEe6sQ