Miniature Victorian Fiberoptic Streetlamp

Choose a lamp style between Slant8, Octagem, or Slottled Octagem and print the body, lid, and gem for that type. Print the universal crossbar and LED base also.  If making the Slotted Octagem also print the struts. Insert a 3 mm sized fiberoptic cable into the body and trim to fit leaving some cable in the base to make contact with the LED and some above the body to go into the lens (gem).  Snap gem into body around the fiberoptic cable. Install struts into the Slotted Octagem (if making that one), then snap lid on top of gem. Glue the crossbar onto post. Next install your LED into the base and wire to controller/power supply.  Snap lamp body assembly into the base,  set up in your miniature display, and turn on to enjoy.  Be sure the fiber optic cable is pressed against the LED for the brightest lamp.  All parts can be printed at 0.2 mm except the Slotted Octagem and struts which work best at 0.1 mm.  No supports needed for printing, but brims might be depending on your print plate.