Miata mk2.5/mx5 NBFL low plate kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to set up my miata/mx5's plate lower, but couldn't find any commercial kit for that purpose, so I decided to…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 1090
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to set up my miata/mx5's plate lower, but couldn't find any commercial kit for that purpose, so I decided to design one!
The idea was to design it with two parts:
One is flexible and then can be easily deformed to be sticked to the bumper using some strong 3M adhesive tape (red).
The other one, not flexible, will receive the plate, using some rivet.
Both will be linked using four M3 lock nut + M3x35 bolts.
I used black PETG, as it is flexible and resistant to outdoor UV/weather.
I printed it with 50% infill to be strong enough.
Included are Fusion360 files and STL files.
Have fun! :)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.15
Infill:
50%
Filament: Prusament PETG Jet Black
Notes:
I'm always using Brim...
Use strong 3M adhesive
preposition the parts
Stick it!
Rivet the plate using a washer to prevent cracking!
Enjoy the result! :)
Category: Automotive