Toolset for everyday 3D printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Neatly store the tools you use most when 3D printing.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The dedicated 3D printing enthusiast constantly needs tools. Some rarely, but some all the time. And the latter must be directly accessible.
Where's my scraper? My filament cutter? And where did I put that darn nozzle 2 hours ago? That ends here! All important tools are tidied up and combined in one tool holder.
You can download two of the very useful tools in the photo here:
Nozzle wrench
Filament Cutter 45°
Update 2023-01-03: Two Extensions available.
PRINTING INFORMATION
I myself printed the set with a 0.6mm nozzle. Sufficient for this purpose and is much faster than with a 0.4mm nozzle. Since some of you may not have a 0.6mm nozzle, I have provided files for both nozzles:
0.6mm nozzle:
Layer height: 0.40mm (first layer: 0.2mm)
Infill: 15%
Supports: no
Printing pause at 8.60mm to insert nuts.
0.4mm nozzle:
Layer height: 0.25mm (first layer: 0.2mm)
Infill: 15%
Supports: no
Printing pause at 8.45mm to insert nuts.
Four M6 nuts are required to attach the nozzles.
If you like the color changes. They are at 14.2 and 82.2mm.
I'M LOOKING FORWARD TO YOUR MAKES! :-)
If you like this model, feel free to check out my others here.
And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.