Hex-Gyroid Fidget Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagonal fidget toy with rotating rings and eyelet. Very soothing ...
- Ocena
- 5 / 5
- Polubienia
- 104
- Pobrania
- 588
- Wydruki
- 2
- Wyświetlenia
- 1998
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
The hexagon is one of my favorite geometric shapes for designing, so I created this fidget. It has an eyelet and can also be used as a necklace, as a Christmas tree decoration and - last but not least - also as a calibration test for your printer.
If you want a larger version, just scale it up.
Notes:
Print with a maximum of 0.4 mm line width and 0.2 mm layer height.
This model has a tight fit. If you cannot separate the individual rings, here are a few suggestions to help:
- carefully loosen the object from the print bed with a knife, ring by ring, from the outside in,
- print slower (20 mm/s for walls),
- reduce flow by 1 to 2%,
- retract the walls of the object by a few hundredths of a millimeter (in Cura with the "Horizontal Expansion" setting and in PrusaSlicer with "XY Size Compensation").
If nothing helps, let me know in the comments - I will then upload a version with larger tolerances.
Do you like it?
If you have printed this toy and you like it, I would be happy if your make is uploaded.