Dayton Audio Amplifier rack

I wanted to clean up some deskspace so i made a amplifier rack to mount under the desk and also to mount the PSU. Both are mounted with double sided tape like 3M or GoPro mount with little padding between the tape. I made the rack in pieces for best result. It's made with tongue and groove with press fit so than you mount the front and back piece it's hold together very well. I just took some quickglue for extra security. The USB mount if you choose that are mounted with 2pcs of M3x10 for easy access and with separate front piece under if you need to mount headphone jack or similar. I didn't glue the USB piece so i can disassembly later if needed. I made 2 different filler pieces if you want to use DTA2.1BT2 or DTA30HP. Made the last one in 2 alternative. I printed mine in 2 pieces bec i wanted textured front and saved some support material. If you want to use the shelf for a DTA2.1BT2 you gonna need a cable for the bluetooth-antenna bec it's shorter and don't reach the socket i made for the antenna. If you choose the headphone holder it's mounted with 2pcs of countersunk M4x20. Made some cable-hooks also for easy clean installation.

The hole rack is very steady and i'm very happy with the result. I on the way to do one more option with a rack with the 2 first floors and without the USB part if you have a DTA-PRO 100W with DTA-100LF and you still gonna have a separate shelf for the remote like in the picture.

Hope you like it.