Snowman & Christmastree Snowglobe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snowglobe as decoration for the winter season
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 684
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: The base has been made higher resolution than shown in the picture
All parts except for the shell can be printed without supports.
I used 1.5-2.0mm layerheight depending on the overall printtime.
I also used a little bit of glue while inserting the balls but this isn't necessary.
I would recommended to use pliers when inserthing the balls because it can be quite challenging to do it with your fingers.
I added bevels to most parts to make them easier to assemble.
Make sure to print “Snowman-button” 5 times, “ball-4mm” 8 times and “Ball-4mm” 29 times.