Estonian counties - Eesti maakonnad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Model is made in Tallinn University in part of ELU 3D project.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial
Course introduction: https://elu.tlu.ee/en
Course related to model: https://elu3d.wordpress.com
This model includes all Estonian counties and can be assembled as a puzzle. For “Saaremaa” and “Hiiumaa” pieces locations in the puzzle, google for Estonian map to know the location of islands.
How to print
This model is recommended to be printed using pauses for installing 5x5x2mm magnets inside the print. This recommendation however can be ignored but then your parts will not magnetically attract.
Layer height: 0.2mm
Infill: 10%
Pause at height: Layer 31 (NB! Not to confuse with height 31!!!)
Park Print head: X10mm Y10mm
Recommended not to pick Home position X0 & Y0 due to possible layer shifts affected by belt printers and roller tensions.
When using CURAs "Pause at height" function you can set the pause height at layer 31. Added picture with other parameters. Layer 31 will ensure correct height which works for all model pieces. Model pieces named “Saaremaa” and “Hiiumaa” do not need “Pause at height” function because there will not be any magnet placement spots inside them.