MPSM Extruder Baseplate v1.1 (made taller)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See original for installation instructions:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
See original for installation instructions: https://www.thingiverse.com/thing:2029972
My original printing broke right above where the bowden tube and nut fit. Also, my MPSM has a thinner nut than the original accounted for.
To fix those two things, I have made it taller, so that the piece above the nut is much thicker and stronger, and I've also included a version that fits the thinner nut (2.5mm) that my printer has.
I've been playing with heated enclosures and it seems like my original one warped due to heat, so I printed this one in ABS. We'll see if it does any better...
If you want to tweak this, I've included the scad I used, but you'll need to download the original stl before it'll work.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
0.35
Infill:
22
Filament: Pxmalion ABS Clear
Notes:
I printed mine at 0.35 mm layer height, and either the change in material, something about how I remixed the STL, or the thick height made all the holes too small. I had to drill out the hole for the bowden tube on both sides, and the mounting screws had to cut their own threads through the plastic. I like the result though -- everything is super tight.
Category: 3D Printer Parts