Phrozen Mighty adapter for Anycubic wash and cure plus top basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this adapter for the top basket, it is not needed for the bottom basket as the build plate fits snugly. What I…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this adapter for the top basket, it is not needed for the bottom basket as the build plate fits snugly. What I found out is that the mighty's build plate has enough wiggle room for it to move and with the right angle and distance can fall in and damage your print.
The purpose of the adapter is to remove the possibility for the build plate to move.
Printing:
- Layer height of 0.3mm
- 25% infill
- No supports or rafts
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
25
Filament: PLA black
Category: 3D Printer Accessories