1 / 1
Rockrrito (The Rock + Taco Bell Burrito) — zdjęcie 1

Rockrrito (The Rock + Taco Bell Burrito)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a fun mashup I slung together.

Ocena
0 / 5
Polubienia
7
Pobrania
71
Wydruki
0
Wyświetlenia
647
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Just a fun mashup I slung together. No supports needed.. 

I 3D-scanned a Taco Bell burrito and remixed it with this file:  https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson

**This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D

Printing Info:

FDM or Resin: FDM or resin
Scaling: Current Size: 59 x 154 x 44. Scale up or down as you please!
Supports: No supports needed!
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.

Tagi