Rockbob Squarepants (Spongebob + The Rock)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a fun mashup I slung together.
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 916
- Wydruki
- 1
- Wyświetlenia
- 2747
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files:
- https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
- https://www.thingiverse.com/thing:4575259
**This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D
Printing Info:
FDM or Resin: FDM or resin
Scaling: Current Size: 73 x 42 x 99. Scale up or down as you please!
Supports: Supports for the hands and body. None needed for the face.
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.