Kaabo Mantis King GT long fender bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to stabilize the long (rear) fender on Kaabo Mantis King GT.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 135
- Wydruki
- 2
- Wyświetlenia
- 1722
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Update!
Added a version 2.1 which attach with a M2 or M3 screw instead of snapp on. Found that the first version easily breaks if you hit the fender with something in combination with vibration from riding.
2.1 version slightly thicker in some places for added strength to not break as easily due to vibrations when riding.
Printing:
V1 Due to its shape you need to print with support.
V2.1 Can be printed standing and no support needed*.
*Update: After some more testing I recommend printing as V1 for better stiffness.
Assembly:
V1 - Remove the rear fender from the scooter, “click on” the bracket by first tilting the bracket inwards. Remove the two screws holding the rear brake caliper. Put fender with the bracket back into its position and att attached the bracket with two M6 screws which is 4 mm longer than the original screws together with the brake caliper. Done!
V2.1 - With version two there is no need to remove the fender. Attached the bracket with the calliper, as explained above and drill a small hole through the fender to attached the fender to the bracket with an M2 or M3 screw.