zipper endstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
endstop for zippers
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 171
- Wydruki
- 2
- Wyświetlenia
- 631
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
The endstop of my zipper said good by, so I needed a replacement.
print instructions
- PLA should be fine
- 25% cubic infill, to make it stronger
assembly
press the opening with closed bottom firmly into the side where your old endstop get loose. It should snap in when it is in the right position.
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
Hope you enjoy my models.