Mr. Rocks (The Rock + Mr. Krabs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a fun mashup I slung together!
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 244
- Wydruki
- 0
- Wyświetlenia
- 1251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files:
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
https://www.thingiverse.com/thing:4013046
**This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D
Printing Info:
FDM or Resin: FDM or resin
Scaling: Current Size: 143 x 87 x 112. Scale up or down as you please!
Supports: Supports for the hands/arm, hair, and chin.
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.