1 / 2
Air Assist AUFERO LASER (1-2) LU2-4 SF- 3 blowing nozzle — zdjęcie 1
1 / 2

Air Assist AUFERO LASER (1-2) LU2-4 SF- 3 blowing nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3 way blower Air Assist (no laser modification needed- M3 with squared nut needed to fix it)

Ocena
0 / 5
Polubienia
5
Pobrania
70
Wydruki
0
Wyświetlenia
433
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

Remixed the Frederic one and changed orientation of all nozzle, to avoid the air flow to leave an uncovered axis. This air assist blows to cover completely the cut on all movements of laser. 

Holes on nozzle are 1.3mm diameter: if printed with FDM is necessary to enlarge hole drillling through with a 1.5mm drill bit, to ensure right air flow.

See Fredric Assembly images to understand how to asembly to Laser head

In my tests the cut is completely clean. Used with a 35 l/min air pump.

Tagi